Suburban Passenger Front Body Mount #1.
Rubber pad between body and frame.
(there is also cab frame-mount near the
firewall - same as used on pickup).
Suburban Passenger Front Body Mount #2.
Rubber pad between body and frame.
Suburban Passenger Front Body Mount #2.
Rubber pad between body and frame.
Suburban Passenger Front Body Mount #3.
Block with rubber pad nailed to block.
Block is screwed to a plate above it.
On this side of the body a rubber pad
was added to line up body/fender to
running board.
Suburban Passenger Front Body Mount #3,
on driver side of body/frame.
Block with rubber pad nailed to block.
Block is screwed to a plate above it.
No additional rubber pad needed on
this side, to line up body/fender to
running board.
Suburban Passenger Front Body Mount #4,
on driver side of body/frame.
Block with rubber pad nailed to block.
Block is screwed to a plate above it.
No additional rubber pad needed on
this side, to line up body/fender to
running board.
Suburban Passenger Front Body Mount #5,
on driver side of body/frame.
Rubber pad between body and frame.
Top (left) and bottom (right) of
the wood blocks (4 needed).
Rubber pad tacked to block.
Two screw holes to attach block
to plate above it (with thin screw).
Mounting-bolt hole is off-center.
